How to read tread depth
Who this is for
You read the tread stored on a set and decide whether to talk to the customer about replacement.
Before you start
- Tread is millimetres, the same unit you typed at intake.
- A full tire on this scale is 10 mm. The bar on the customer page is scaled to that.
- These colours are shop prompts. They are not a legal pass or fail.
Steps
- Open Tire Storage.
- Read the lowest-tread column on the list.
- Filter to sets at or under a millimetre depth when you are calling customers with worn tires.
- Open a set.
- Read front left, front right, rear left, and rear right.
- Treat a measurement under 4 mm as amber.
- Treat a measurement under 2 mm as red.
How you know it worked
Amber is the warning band from under 4 mm down to 2 mm. Red is under 2 mm. 4 mm and above stays in the normal colour. 2.0 mm is still amber, because red starts under 2 mm. The customer page shows the same millimetre readings.
Common snags
- 4 mm is not amber. The warning starts under 4 mm.
- The lowest-tread column uses the shallowest of the four corners, not an average.
- Replacement recommended is a separate mark you set at intake. The colour does not turn that mark on by itself.
- Catalog tire specs on a parts line are a different number, in 32nds of an inch. Stored sets on this screen are millimetres.