Skip to main content

How to look up a trouble code

Look up a trouble code

Who this is for​

Anyone with Vehicles open who needs a plain-language meaning for a scanner code. The DTC Reference card on the vehicle is a lookup only. It does not save the code on the vehicle.

Before you start​

  • Open Customers & Communications and choose Vehicles, then open the vehicle.
  • Stay on Overview. To store codes on a job, use Diagnostic Codes on the service order instead. That section is on New Service Order and on Edit.

Steps​

  1. On the vehicle Overview, find DTC Reference.
  2. Type a code, such as P0301, or a keyword, such as misfire.
  3. Read the matching description in the results.
  4. To keep the code on a repair, open the service order and add it under Diagnostic Codes (optional).

How you know it worked​

The card shows a description for the code, with a badge for powertrain (P), body (B), chassis (C), or network (U). The vehicle record is unchanged. On a service order, a code you attached shows as a chip, and the saved order lists it on the Diagnostics card.

Common snags​

  • Fewer than two characters does not search. If nothing matches, check the code again. The lookup is the built-in list, not a live call to the vehicle.
  • This card does not attach the code to the car. Leaving the page clears the search.
  • Technicians who can open an assigned service order see codes already saved on that order’s Diagnostics card. Attaching new codes is done by whoever edits the estimate.